The PP-60-XHD pole puller delivers more than 125,000 pounds of pulling force and can handle poles up to 26 inches in diameter. The 1,500-pound unit utilizes two hydraulic cylinders, each featuring a cam action head with beveled teeth to effectively grip the pole. A set of chains holds the cam heads together during the pulling process. As the cylinders push upward, the cam heads rotate, the teeth dig into the pole and lift it out. The cylinder stroke is 24 inches — compared to 15 inches on other pullers — enabling crews to efficiently pull out a pole in fewer cycles. Additionally, the dual cylinder design causes less damage to poles than other pullers, allowing some poles to be re-used.

 

The PP-60-XHD can be set up by one person and grips the pole with cam-action heads.  It features built-in fork pockets, lifting points and high strength alloy chains.  The PP-60-XHD may be used with open-center or closed-center hydraulic systems.

 

The PP-60-XHD is operated using the controls on a hydraulic power source such as a skid steer, and features multiple lifting points for easy positioning by crane or skid steer.

Specifications:

 

Performance:

Pull (lb.) at 2,250 psi 125,000.

 

Maximum Pole Size:

26’’ Diameter, 81’’ Circumference.

 

Cylinder:

Stroke 24″, Bore 6″, Rod 4″.

 

Head:

Cam action, has beveled teeth for max grip.

Chain-(2) 3/4’’ x 4’’ x 5’ long on drum head.

 

Base Weldment:

Exterior 46″ x 46″; Interior 28″ x 28″

Weight 1,500 lbs.

 

Lifting Points:

2 chains on the head, Forklift pockets.

3-1/4’’ x 7-1/4’’ x 46’’ long.