TL10V2 Specs
MACHINE DIMENSIONS
A Maximum Lift Height to Bucket Pin:
10 ft 4.8 in (3,169 mm)
B Dump Height Fully Raised:
7 ft 11.9 in (2,435 mm)
C Dump Reach Fully Raised:
3 ft 1.4 in (950 mm)
D Dump Angle: 40°
E Rollback Angle: 30°
F Track Ground Contact Length:
4 ft 7.9 in (1,419 mm)
G Machine Length: 9 ft 7.2 in (2,925 mm)
H Transport Length: 12 ft 1 in (3,680 mm)
I Transport Height: 7 ft 5.4 in (2,270 mm)
J Departure Angle: 30°
K Clearance Circle with Bucket:
7 ft 8.5 in (2,350 mm)
L Clearance Circle without Bucket:
5 ft (1,535 mm)
M Clearance Circle Rear:
5 ft 5.2 in (1,655 mm)
N Track Width: 15.7 in (400 mm)
O Ground Clearance: 12.6 in (320 mm)
P Overall Width without Bucket:
5 ft 8.5 in (1,740 mm)
OPERATING PERFORMANCE
with counter weight option
Operating Weight - Canopy:
9,950 lbs (4,515 kg)
Operating Weight - Cab:
10,270 lbs (4,660 kg)
Tipping Load:
7,765 lbs (3,522 kg)
Rated Operating Capacity:
2,718 lbs (1,233 kg)
SAE J818*
Operating Load at 50% of Tipping Load:
3,882 lbs (1,761 kg)
Bucket Breakout Force:
6,520 lbs (2,960 kg)
Lift Arm Breakout Force:
5,400 lbs (2,450 kg)
Traction Force:
9,730 lbs (4,410 kg)
Ground Pressure - Canopy:
4.9 psi (34.3 kPa)
Ground Pressure - Cab:
5.1 psi (35.4 kPa)
Travel Speed - Low:
4.8 mph (7.7 km/hr)
Travel Speed - High:
7.0 mph (11.3 km/hr)
*Operating capacity of compact track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
HYDRAULIC SYSTEM
Auxiliary Flow - Primary Circuit:
18.8 gpm (71.2 Lpm)
Auxiliary Flow - High Flow (optional):
32.8 gpm (124 Lpm)
Hydraulic System Pressure:
3,481 psi (24 MPa)
ENGINE
Make/Model:
Kubota V3307CR-TE4B
Engine Displacement:
203 cu in (3.3 L)
Horsepower @ 2,600 rpm:
74.3 hp (55.4 kW)
Maximum Torque @ 1,500 rpm:
195 ft-lb (265 Nm)
FLUID CAPACITIES
Engine Lubrication:
11.8 qt (11.2 L)
Cooling System:
15.9 qt (15 L)
Fuel Tank Capacity:
21.5 gal (81 L)
Fuel Consumption (65% full load):
2.7 gal/hr (10.3 L/hr)
Hydraulic Reservoir Capacity:
9.5 gal (36 L)
Hydraulic System Capacity:
17.2 gal (65 L)
TL10V2 features
ENGINE
• EPA Final Tier 4 Emission Compliant
• Turbocharged
• High Pressure Common Rail Injection System
• DOC+DPF Exhaust After Treatment
• Automatic Fuel Bleed System
• Active Power Control Power Management System
• Working Modes - Standard and ECO
• Dual Element Air Filter
• Dial and Foot Throttle
• High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
ELECTRICAL
• 5’7 Multi-Informational Color Display
• Sealed Rocker Switches
• 12 volt System with 60 amp Alternator
• LED Work Lights: Two Front and Two Rear
• Engine Preheat
• Hour Meter
• Back-up Alarm
UNDERCARRIAGE AND FRAME
• Double Planetary Reduction Drives
• Permanently Sealed Track Rollers with Metal Face Seals
• Fully Welded Frame with Integrated Cross Members
• Two-Speed Travel
• 15.7” Rubber Track
• Grease Type Track Adjuster
• Front and Rear Tie-Down Points and Lift Points
• Rear Bumper Integrated into Frame
OPERATOR'S STATION
• Tilt-up Operator's Station
• Deluxe High Back Suspension Seat
• Rear View Camera
• Rear Pivoting Lap Bar with Arm Rest
• ROPS/FOPS Structure
• Retractable 2" Seat Belt
• Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front wiper, and AM/FM/MP3 Radio with NOAA Weatherband
• Polycarbonate Door and Level 2 Guard
HYDRAULIC & WORKING EQUIPMENT
• Vertical Lift Design
• Pilot Hydraulic Controls
• Boom Float with Detent
• Cushioned Boom Cylinders
• Hydraulic Self Leveling
• Proportional Auxiliary Hydraulic Controls with Detent
• Pressure Relieving Flat Faced Coupler Body
• 14-Pin Connector with Push Button Control
• High Capacity Steel Hydraulic Tank
• Mechanical Quick Coupler
• Hydraulic Quick Coupler
• High Flow Auxiliary Hydraulics 32.8 gpm
• Ride Control
• Pattern Change Valve (ISO or H)
TAKEUCHI FLEET MANAGEMENT
• 2 Year Standard Service
• Minimize Downtime
• Remote Diagnostics
• Utilization Tracking
• Proactive Maintenance
• Control Costs
TAP HERE TO CALL US,
AND WE'LL HOOK YOU UP!
(618) 322-3436
© 2016 BMCW Rentals, All Rights Reserved.