C232 Skid steer specs

DIMENSIONS

Bucket hinge pin, in (mm): 131.1 (3330)

Top of ROPS, in (mm): 80.4 (2043)

Bottom of level bucket, fully raised, in (mm): 124.2 (3155)

Overall length without attachment with coupler, in (mm): 117.8 (2993)

Dump angle, degrees: 54.7

Dump reach (max height), in (mm): 34.4 (875)

Rollback, bucket on ground, degrees: 32.8

Rollback, bucket at full height, degrees: 84.8

Track on ground, in (mm): 64.5 (1639)

Ground clearance (bottom of belly pan), in (mm): 9.5 (243)

Angle of departure, degrees: 32

Clearance circle without bucket, in (mm): 56.2 (1428)

Clearance circle rear, in (mm): 70.4 (1789)

Overall width, in (mm): 76 (1930)

Ground pressure, PSI (with spec belt): 4.2

 

ENGINE

Manufacturer/model FPT / F5H FL463A*F001

Bore/stroke, in (mm) (3.9 x 4.3) 99 x 110

Displacement, in3 (L) 207 (3.4)

Fuel injection HPCR Direct

Air intake Turbocharged Aftercooled with external EGR

Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm

Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm

Peak torque, lb-ft (Nm) 232 (314) @ 1400 rpm

 

POWER TRAIN

Travel speed, low range, mph (km/h) 5.1 (8.2)

Travel speed, high range (optional), mph (km/h) 7.6 (12.2)

 

HYDRAULIC SYSTEM

Pump flow, gpm (Lpm) 24.2 (91.5)

Optional high flow, gpm (Lpm) 37.6 (142.5)

Relief pressure, psi (bar) 3046 (210)

PERFORMANCE SPECS

Rated operating load, 50% tip, lbs (kg) 3200 (1451)

Rated operating load, 35% tip, lbs (kg) 2240 (1018)

Tipping load, lbs (kg) 6400 (2902)

Breakout force, lift cylinder, lbs (kN) 4840 (21.5)

Breakout force, bucket cylinder, lbs (kN) 7510 (33.4)

Operating weight, lbs (kg) 9630 (4370)